feeding, mixing: Through the feeding system will be quantitative cement, foaming agent, stabilizing foam enhancer added mixer, dry mixed for 30 seconds; stirring: The quantitative warm water into the mixer, wet stirring for 2 minutes; Add the quantitative foaming agent into the mixer for 8-15 seconds; injection mold, foaming: The slurry is injected into the mold foam, foaming process of about 3-5 minutes; the initial maintenance: injection mold After the completion of a number of hours for the initial maintenance; demoulding: To be foamed cement in...

Foaming machine first appeared in foreign countries, its original model is the use of high-speed rotary impeller spinning, it is also known as "Whipped machine." Later, with the continuous progress of technology, the technical content of the foaming machine continues to improve, new models continue to emerge, forming a different technical system. China started using the foaming machine as early as the 1950s, but it is not a special foaming model, but the mortar mixer is used. The foaming agent is added directly to the mortar mixer or concrete mixer, where the foaming agent mixes with the mo...

Regardless of the foaming machine, the basic principle of foaming is to introduce air into the foaming agent solution. Various models vary in the way the gas is introduced, and thus the effects are different. The formation of foam has two necessary factors, one is the blowing agent solution, two is the air, both indispensable. Without a foaming agent solution, the liquid film that surrounds the gas will not form and there will be no air bubbles. And no gas, single blowing agent solution, bubble can not form. In the bubble formation system, the blowing agent solution is a...